bertos/cfg/cfg_ser.h File Reference

Configuration file for serial module. More...

Go to the source code of this file.

Defines
#define	CONFIG_UART0_TXBUFSIZE   32
	Example of setting for serial port and spi port.
#define	CONFIG_UART0_RXBUFSIZE   32
	Size of the inbound FIFO buffer for port 0 [bytes].
#define	CONFIG_UART1_TXBUFSIZE   32
	Size of the outbound FIFO buffer for port 1 [bytes].
#define	CONFIG_UART1_RXBUFSIZE   32
	Size of the inbound FIFO buffer for port 1 [bytes].
#define	CONFIG_SPI_TXBUFSIZE   32
	Size of the outbound FIFO buffer for SPI port [bytes].
#define	CONFIG_SPI_RXBUFSIZE   32
	Size of the inbound FIFO buffer for SPI port [bytes].
#define	CONFIG_SPI0_TXBUFSIZE   32
	Size of the outbound FIFO buffer for SPI port 0 [bytes].
#define	CONFIG_SPI0_RXBUFSIZE   32
	Size of the inbound FIFO buffer for SPI port 0 [bytes].
#define	CONFIG_SPI1_TXBUFSIZE   32
	Size of the outbound FIFO buffer for SPI port 1 [bytes].
#define	CONFIG_SPI1_RXBUFSIZE   32
	Size of the inbound FIFO buffer for SPI port 1 [bytes].
#define	CONFIG_SPI_DATA_ORDER   SER_MSB_FIRST
	SPI data order.
#define	CONFIG_SPI_CLOCK_DIV   16
	SPI clock division factor.
#define	CONFIG_SPI_CLOCK_POL   SPI_NORMAL_LOW
	SPI clock polarity: normal low or normal high.
#define	CONFIG_SPI_CLOCK_PHASE   SPI_SAMPLE_ON_FIRST_EDGE
	SPI clock phase you can choose sample on first edge or sample on second clock edge.
#define	CONFIG_SER_TXTIMEOUT   -1
	Default transmit timeout (ms).
#define	CONFIG_SER_RXTIMEOUT   -1
	Default receive timeout (ms).
#define	CONFIG_SER_HWHANDSHAKE   0
	Use RTS/CTS handshake.
#define	CONFIG_SER_DEFBAUDRATE   0UL
	Default baudrate for all serial ports (set to 0 to disable).
#define	CONFIG_SER_STROBE   0
	Enable strobe pin for debugging serial interrupt.

---

Detailed Description

Configuration file for serial module.

Version:

Id

cfg_ser.h 2845 2009-09-01 14:41:47Z lottaviano

Author:

Daniele Basile <asterix@develer.com>

Definition in file bertos/cfg/cfg_ser.h.

---

Define Documentation

#define CONFIG_SER_RXTIMEOUT   -1

Default receive timeout (ms).

Set to -1 to disable timeout support.

Definition at line 173 of file bertos/cfg/cfg_ser.h.

#define CONFIG_SER_TXTIMEOUT   -1

Default transmit timeout (ms).

Set to -1 to disable timeout support.

Definition at line 166 of file bertos/cfg/cfg_ser.h.

#define CONFIG_UART0_TXBUFSIZE   32

Example of setting for serial port and spi port.

Edit these define for your project. Size of the outbound FIFO buffer for port 0 [bytes].

Definition at line 54 of file bertos/cfg/cfg_ser.h.