examples/benchmark/kernel-core_avr/hw/hw_sipo.h File Reference

Macro for HW_SIPO_H. More...


Defines
#define	SIPO_SET_LEVEL_LOW(dev) do { /* Implement me! */ } while (0)
	Define generic macro to set pins logic level.
#define	PULSE_LOW(dev) do { /* Implement me! */ } while (0)
	Generate one low pulse on select line.
#define	PULSE_HIGH(dev) do { /* Implement me! */ } while (0)
	Generate one hight pulse on select line.
#define	SIPO_SI_HIGH() do { /* Implement me! */ } while (0)
	Define the procedure to drive serial input in sipo device (SI).
#define	SIPO_SI_CLOCK(clk_pol)
	Drive clock to shift SI data into latch.
#define	SIPO_LOAD(device, load_pol) do { /* Implement me! */ } while (0)
	Do everything needed in order to load dato into sipo.
#define	SIPO_ENABLE() do { /* Implement me! */ } while (0)
	Enable the shift register output.
#define	SIPO_SET_LD_LEVEL(device, load_pol) do { /* Implement me! */ } while (0)
	Set polarity for Load, Clk, SI signals.
#define	SIPO_INIT_PIN() do { /* Implement me! */ } while (0)
	Do anything that needed to init sipo pins.
Enumerations
enum	SipoMap
	Map sipo connection on board.