examples/triface/boot/cfg/cfg_ser.h File Reference

Configuration file for serial module. More...

Go to the source code of this file.

Defines
#define	CONFIG_BOOT_PORT   1
	Kdebug console on debug unit.
#define	CONFIG_BOOT_BAUDRATE   115200
	Baud-rate for the kdebug console.
#define	CONFIG_UART0_TXBUFSIZE   32
	[bytes] Size of the outbound FIFO buffer for port 0.
#define	CONFIG_UART0_RXBUFSIZE   64
	[bytes] Size of the inbound FIFO buffer for port 0.
#define	CONFIG_UART1_TXBUFSIZE   32
	[bytes] Size of the outbound FIFO buffer for port 1.
#define	CONFIG_UART1_RXBUFSIZE   64
	[bytes] Size of the inbound FIFO buffer for port 1.
#define	CONFIG_SPI_TXBUFSIZE   32
	[bytes] Size of the outbound FIFO buffer for SPI port (AVR only)
#define	CONFIG_SPI_RXBUFSIZE   32
	[bytes] Size of the inbound FIFO buffer for SPI port (AVR only)
#define	CONFIG_SPI0_TXBUFSIZE   32
	[bytes] Size of the outbound FIFO buffer for SPI port 0.
#define	CONFIG_SPI0_RXBUFSIZE   32
	[bytes] Size of the inbound FIFO buffer for SPI port 0.
#define	CONFIG_SPI1_TXBUFSIZE   32
	[bytes] Size of the outbound FIFO buffer for SPI port 1.
#define	CONFIG_SPI1_RXBUFSIZE   32
	[bytes] Size of the inbound FIFO buffer for SPI port 1.
#define	CONFIG_SPI_DATA_ORDER   SER_MSB_FIRST
	SPI data order (AVR only).
#define	CONFIG_SPI_CLOCK_DIV   16
	SPI clock division factor (AVR only).
#define	CONFIG_SPI_CLOCK_POL   0
	SPI clock polarity: 0 = normal low, 1 = normal high (AVR only).
#define	CONFIG_SPI_CLOCK_PHASE   0
	SPI clock phase: 0 = sample on first edge, 1 = sample on second clock edge (AVR only).
#define	CONFIG_SER_TXTIMEOUT   100
	Default transmit timeout (ms). Set to -1 to disable timeout support.
#define	CONFIG_SER_RXTIMEOUT   100
	Default receive timeout (ms). Set to -1 to disable timeout support.
#define	CONFIG_SER_HWHANDSHAKE   0
	Use RTS/CTS handshake.
#define	CONFIG_SER_DEFBAUDRATE   0
	Default baud rate (set to 0 to disable).
#define	CONFIG_SER_STROBE   0
	For serial debug.

---

Detailed Description

Configuration file for serial module.

Version:

Id

cfg_ser.h 2571 2009-04-20 10:37:07Z batt

Author:

Daniele Basile <asterix@develer.com>

Definition in file examples/triface/boot/cfg/cfg_ser.h.